About :- :-
The project entitled Steam Power Plant is used to
generate electric power from Steam. The
main parts in this project are Boiler, Rotating blades, Gear and wheel setup,
Coil and permanent magnet and Inverting circuit.
The Steam falls on the vanes with high pressure. So the vanes in the turbine are rotated with
constant speed. The gear setup can be
adjusted to control the speed of the fly wheel.
A magnet is connected with the gear.
The magnet will be rotated when the fly wheel is rotated.
The coil is fixed around the magnet. When the fly wheel is rotated, the driver
gear is rotated by one cycle and there by the driver gear is rotated 50 times. According
to Faraday’s law, “As long as there is a change in magnetic flux linked with
the coil, an emf is induced.” So, In
each and every rotation, electricity is generated. This electricity is stored
in a rechargeable Battery. The battery is connected with the Inverter board.
The inverter supplies the electric power in case of power failures. Thus there is an alternate flow of
electricity.
Block
Diagram
0 comments :
Post a Comment